_______________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxims website at www.maxim-ic.com.
0 to 16V, Hot-Swap Controller with 10-Bit
Current, Voltage Monitor, and 4 LED Drivers
19-5328; Rev 0; 7/10
General Description
The MAX5978 hot-swap controller provides complete pro-
tection for systems with a supply voltage from 0 to 16V.
The device includes four programmable LED outputs.
The IC provides two programmable levels of overcur-
rent circuit-breaker protection: a fast-trip threshold for
a fast turn-off, and a lower slow-trip threshold for a
delayed turn-off. The maximum overcurrent circuit-
breaker threshold range is set with a trilevel logic input
(IRNG), or by programming through the I
2
C interface.
The IC is an advanced hot-swap controller that monitors
voltage and current with an internal 10-bit ADC, which is
continuously multiplexed to convert the output voltage
and current at 10ksps. Each 10-bit sample is stored in an
internal circular buffer so that 50 past samples of each
signal can be read back through the I
2
C interface at any
time or after a fault condition.
The device includes five user-programmable digital
comparators to implement overcurrent warning and two
levels of overvoltage/undervoltage detection. When mea-
sured values violate the programmable limits, an external
ALERT output is asserted. In addition to the ALERT sig-
nal, the IC can be programmed to deassert the power-
good signal and/or turn off the external MOSFET.
The IC features four I/Os that can be independently
configured as general-purpose input/outputs (GPIOs) or
as open-drain LED drivers with programmable blinking.
These four I/Os can be configured for any mix of LED
driver or GPIO function.
The device is available in a 32-pin thin QFN-EP pack-
age and operates over the -40NC to +85NC extended
temperature range.
Ordering Information
Features
S Hot-Swap Controller Operates from 0 to 16V
S 10-Bit ADC Monitors Load Voltage and Current
S Circular Buffers Store 5ms of Current and Voltage
Measurements
S Internal Charge Pump Generates n-Channel
MOSFET Gate Drive
S Internal 500mA Gate Pulldown Current for Fast
Shutdown
S VariableSpeed/Bilevel" Circuit-Breaker
Protection
S Precision-Voltage Enable Input
S Alert Output Indicates Fault and Warning
Conditions
S Open-Drain Power-Good Output with
Programmable Polarity
S Open-Drain Fault Output
S Four Open-Drain General-Purpose Outputs Sink
25mA to Directly Drive LEDs
S Programmable LED Flashing Function
S Latched-Off Fault Management
S 400kHz I
2
C Interface
S Small, 5mm x 5mm, 32-Pin TQFN-EP Package
Applications
Blade Servers
DC Power Metering
Disk Drives/DASD/Storage Systems
Soft-Switch for ASICs, FPGAs, and
Microcontrollers
Network Switches/Routers
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
VariableSpeed/Bilevel is a trademark of Maxim Integrated
Products, Inc.
EV
A
LU
A
T
IO
N
KI
T
A
VA
IL
A
B
LE
PART
TEMP RANGE
PIN-PACKAGE
MAX5978ETJ+
-40NC to +85NC
32 TQFN-EP*
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
MAX5981BETE+
IC CTRLR PD IEEE 802.3AF 16TQFN
MAX5986AETE+
IC POE SWITCH PSE 16TQFN
MAX6509CAZK/V+T
IC TEMP SWITCH RES-PROG 5TSOT
MAX6513TT075+T
IC TEMP SWITCH REMOTE 6-TDFN
MAX6581TG9A+
IC TEMP SENSOR 8-CH PREC 24-TQFN
MAX6602UE9A+T
IC TEMP MONITOR 5CH 16-TSSOP
MAX6604ATA+TW
IC TEMP SENSOR DDR MEMORY 8TDFN
MAX6616AEG+T
IC TEMP MON FAN CNTRL 24QSOP
相关代理商/技术参数
MAX5978ETJ+T
功能描述:热插拔功率分布 0-16V Hot-Swap Controller RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube
MAX5980EVKIT#
功能描述:电源开关 IC - POE / LAN MAX5980 Eval Kit RoHS:否 制造商:Fairchild Semiconductor 开关数量:Single 开关配置:SPST 开启电阻（最大值）:7.3 Ohms 串话: 带宽: 开启时间（最大值）:13 ns 关闭时间（最大值）:20 ns 切换电压（最大）: 工作电源电压:8 V to 26 V 最大工作温度:+ 125 C 安装风格:Through Hole 封装 / 箱体:TO-220F-6
MAX5980EVKIT+
功能描述:电源开关 IC - POE / LAN RoHS:否 制造商:Fairchild Semiconductor 开关数量:Single 开关配置:SPST 开启电阻（最大值）:7.3 Ohms 串话: 带宽: 开启时间（最大值）:13 ns 关闭时间（最大值）:20 ns 切换电压（最大）: 工作电源电压:8 V to 26 V 最大工作温度:+ 125 C 安装风格:Through Hole 封装 / 箱体:TO-220F-6
MAX5980GTJ+
功能描述:电源开关 IC - POE / LAN 0-16V Hot-Swap Controller
RoHS:否 制造商:Fairchild Semiconductor 开关数量:Single 开关配置:SPST 开启电阻（最大值）:7.3 Ohms 串话: 带宽: 开启时间（最大值）:13 ns 关闭时间（最大值）:20 ns 切换电压（最大）: 工作电源电压:8 V to 26 V 最大工作温度:+ 125 C 安装风格:Through Hole 封装 / 箱体:TO-220F-6
MAX5980GTJ+T
功能描述:电源开关 IC - POE / LAN 0-16V Hot-Swap Controller
RoHS:否 制造商:Fairchild Semiconductor 开关数量:Single 开关配置:SPST 开启电阻（最大值）:7.3 Ohms 串话: 带宽: 开启时间（最大值）:13 ns 关闭时间（最大值）:20 ns 切换电压（最大）: 工作电源电压:8 V to 26 V 最大工作温度:+ 125 C 安装风格:Through Hole 封装 / 箱体:TO-220F-6
MAX5980UTJ+
功能描述:电源开关 IC - POE / LAN 0-16V Hot-Swap Controller RoHS:否 制造商:Fairchild Semiconductor 开关数量:Single 开关配置:SPST 开启电阻（最大值）:7.3 Ohms 串话: 带宽: 开启时间（最大值）:13 ns 关闭时间（最大值）:20 ns 切换电压（最大）: 工作电源电压:8 V to 26 V 最大工作温度:+ 125 C 安装风格:Through Hole 封装 / 箱体:TO-220F-6
MAX5980UTJ+T
功能描述:电源开关 IC - POE / LAN 0-16V Hot-Swap Controller RoHS:否 制造商:Fairchild Semiconductor 开关数量:Single 开关配置:SPST 开启电阻（最大值）:7.3 Ohms 串话: 带宽: 开启时间（最大值）:13 ns 关闭时间（最大值）:20 ns 切换电压（最大）: 工作电源电压:8 V to 26 V 最大工作温度:+ 125 C 安装风格:Through Hole 封装 / 箱体:TO-220F-6
MAX5981AETE+
功能描述:热插拔功率分布 IEEE 802.3af/at PDIC Controller
RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube